Viscosity Bath Kinematic Viscosity Bath
Constant temperature bath designed for accurate convenient & Economical determination of Viscosity for oil.
Range: +10.000 C to Ambient
Construction: Outer body will be made of Galvanized Sheet along with duly Powder coated and the Inner will be made up of Stainless Steel 16 gauge fully Polished along with the bottom tray. & Top tray will be of Bakelite with 4 Hole for viscosity tubes.
Stirrer: Fully motorized stirrer assembly for the high accuracy & uniformity throughout the chamber.
Control Panel: Control panel will consist of Mains indicator switch, Booster indicator switch, Motorized stirrer indicator switch, Cooling indicator switch Indicator lamp for Heater, Illumination toggle switch & a Solid state Digital P.I.D based Temperature Controller cum indicator along with all the setting the control will sense the inner working temperature thru the means of A class Pt 100 sensor
Controller: PPI make controller will be provided along with the calibration certificate & its traceability the controller will drive thru Solid State Relay, Resolution will be of 00.000 C
Accuracy: The accuracy of the controller will be + 00.00
Windows: Perfectly sealed Toughed glass window on both the sides for perfect visibility for Determination of the Viscosity fitted with Silicon gasket on both side for leak proof operation.
Insulation: High Quality Compressed Glass wool Insulation will be provided between inner wall & the Outer wall to prevent heat loss
Cooling: A hermetically sealed compressor with cooling coil provides efficient cooling in the working chamber the compressor is safeguard with time delay circuit & overload protection the cooling system is placed besides the working chamber for easy servicing & for low noise vibration.
Illumination: The illuminations by fluorescent tubes or lamp for clear visibility of test
Electricity: The unit will work on 220V, 50 Hz single Phase
Working Size: (Approx) 09 Length x 09 Width x 12 Depth without stirring assembly & Heaters for 4 holders
Overall Size: (Approx) 17 Length x 09 Width x 15 Depth with Stirring assembly & Heaters for 4 holders
Ltrs Capacity: Ltrs capacity of the bath will be Approx 38 Ltr along with the cooling zone inside the working chamber.
Viscometer Tube: To hold 4 Viscometer Tubes.
Viscometer Holders: 4 Nos / 6 Nos Viscometer holders
Temperature Range: +15 Deg C to Ambient